Introduction
The Infinix Xpad GT (Model: X1301) is a cutting-edge tablet designed for users who demand a large screen experience with powerful performance. Featuring a high-resolution display, solid MediaTek chipset, and optimized Android version with Infinix’s XOS UI, the Xpad GT balances productivity and entertainment perfectly.
However, like all Android devices, the Xpad GT may sometimes encounter software glitches such as boot loops, system crashes, update failures, or forgotten passwords. When this happens, flashing the official stock firmware (flash file) is often the best way to restore the device to factory condition.
This post covers the essentials of the Infinix Xpad GT X1301 stock firmware, including its uses, flashing requirements, and step-by-step instructions.
What Is Stock Firmware?
Stock firmware is the official software package released by Infinix for your Xpad GT device. It contains the Android OS, Infinix’s XOS interface, and all the necessary system partitions needed to run your tablet smoothly.
Flashing stock firmware is a reliable method to fix software-related problems, unbrick your device, or remove unwanted custom modifications.
Why Flash Infinix Xpad GT Firmware?
You should consider flashing stock firmware if your tablet:
-
🔁 Is stuck on the Infinix logo or boot loop
-
🧱 Has been soft-bricked after a failed update or rooting
-
🔒 Has a forgotten screen lock (PIN, pattern, password)
-
⚠️ Suffers from frequent crashes, freezes, or slowdowns
-
📶 Displays network/IMEI issues or loses connectivity
-
🔄 Needs a manual software update or downgrade
-
🔓 Requires FRP lock removal in some cases
Infinix Xpad GT (X1301) Firmware Details
| Specification | Details |
|---|---|
| Device Name | Infinix Xpad GT |
| Model Number | X1301 |
| Android Version | Android 12 or 13 (varies by release) |
| XOS Version | XOS 12 or 13 |
| Processor (SoC) | MediaTek Helio or Dimensity Series |
| Firmware Type | Official Stock ROM |
| Firmware Format | Scatter File (.txt) |
| Flash Tool | SP Flash Tool |
| File Size | Around 3.5 – 4.0 GB (varies by build) |
⚠️ Ensure you download firmware specifically for X1301 to avoid bricking your device.
Pre-Requisites for Flashing
Before starting the flashing process, make sure you have:
-
✅ A Windows PC or Laptop
-
✅ The correct Infinix X1301 stock firmware package
-
✅ SP Flash Tool installed on your PC
-
✅ MediaTek USB VCOM Drivers installed
-
✅ A compatible USB data cable
-
✅ Your tablet charged to at least 60% battery
-
✅ A backup of all important data (flashing will erase everything)
👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱
How to Flash Infinix Xpad GT (X1301) Stock Firmware
⚠️ Disclaimer:
Flashing stock ROM involves risks. Improper flashing can brick your device permanently. Proceed only if you’re confident and understand the steps.
Step-by-Step Flashing Guide
Step 1: Extract Firmware
-
Download the official Infinix Xpad GT X1301 firmware ZIP
-
Extract it to a folder on your PC
-
Locate the scatter file (usually named
MTxxxx_Android_scatter.txt)
Step 2: Install Drivers
-
Install MediaTek USB VCOM drivers on your PC
-
Restart the PC for proper driver initialization
Step 3: Launch SP Flash Tool
-
Open SP Flash Tool with administrator rights
-
Click Scatter-loading and select the scatter file from the firmware folder
Step 4: Configure Flashing
-
Set the mode to Download Only
-
(Optional) Uncheck Preloader if you want to avoid bricking risk
Step 5: Connect Tablet and Start Flashing
-
Turn off your tablet completely
-
Click Download in SP Flash Tool
-
Connect your tablet to the PC using a USB cable (hold Volume Down or Up button if necessary)
-
The flashing process should start automatically
Step 6: Complete and Reboot
-
Wait for the green checkmark or “Download OK” message
-
Disconnect the tablet and power it on
-
The first boot may take a few minutes
After Flashing
-
Set up your tablet as new (language, Wi-Fi, Google account)
-
Verify all features such as touch, Wi-Fi, camera, and audio
-
Check your IMEI by dialing
*#06# -
Update software from Settings > System Update if necessary
Troubleshooting Common Issues
| Problem | Solution |
|---|---|
| Device not detected | Reinstall MediaTek drivers, try different USB ports/cables |
| Flashing stuck or fails | Use a different SP Flash Tool version, uncheck Preloader |
| Bootloop after flashing | Perform a factory reset from recovery mode |
| IMEI missing or invalid | Use MTK Meta Tool or SN Writer (advanced users) |
Final Notes
-
Only flash stock firmware designed specifically for the Infinix Xpad GT X1301 model
-
Always backup your data before flashing
-
Do not interrupt the flashing process once it starts
-
Use genuine USB cables and a stable PC environment
إرسال تعليق