Infinix Smart 10 Plus (X6725B) Stock Firmware ROM (Flash File) DOWNLOAD and GUIDE

byRahul - 0



Introduction

The Infinix Smart 10 Plus (Model: X6725B) is a budget-friendly Android smartphone featuring a stylish design, a large HD+ display, and a reliable MediaTek processor for everyday tasks. It runs on Android 13 (Go Edition) with Infinix’s custom XOS user interface.

Like any Android device, the Smart 10 Plus may run into issues such as boot loops, app crashes, software errors, or a bricked system due to failed updates, root attempts, or custom ROMs. When this happens, the best solution is to flash the official stock firmware (ROM) to restore the device to its original factory state.

This post will guide you through everything you need to know about the Infinix Smart 10 Plus X6725B flash file — what it is, when you need it, and how to flash it correctly.

What Is Stock Firmware?

Stock firmware (also known as stock ROM or flash file) is the official operating system and software pre-installed on your Infinix Smart 10 Plus. It includes the Android system, Infinix’s XOS skin, recovery, bootloader, and all required partitions.

When you flash the stock ROM, you’re essentially restoring your phone to its original condition — just like it was when you first took it out of the box.

Reasons to Flash Infinix Smart 10 Plus Firmware

You may need to flash the X6725B stock firmware if:

  • 🔁 Your phone is stuck on the boot logo

  • 🧱 The device is soft-bricked or won’t turn on

  • 🔒 You’ve forgotten the screen lock (PIN, pattern, or password)

  • ⚠️ You’re experiencing system UI crashes, lags, or app failures

  • 📶 You’re dealing with IMEI/network issues

  • 🆙 You want to manually upgrade or downgrade the Android version

  • 🔓 You need to bypass FRP (Google Account lock) in some situations

Firmware Details – Infinix Smart 10 Plus (X6725B)

Property Details
Device Name Infinix Smart 10 Plus
Model Number X6725B
Android Version Android 13 (Go Edition)
XOS Version XOS 13 or later
Chipset (SoC) MediaTek Helio A22 or A25 (MT6761 or MT6765)
Firmware Type Official Stock ROM
Firmware Format Scatter File (.txt)
Flash Tool Required SP Flash Tool
File Size Around 2.0 – 2.5 GB (varies by region/build)
Status Stable / Official

⚠️ Caution: Only flash firmware designed for the X6725B model. Flashing the wrong version may brick your device.

Pre-Flash Requirements

Before flashing your phone, make sure you have:

  • A Windows PC or Laptop

  • The correct Infinix X6725B firmware package

  • SP Flash Tool (Smart Phone Flash Tool)

  • MediaTek USB VCOM Drivers installed on your PC

  • A USB cable (preferably original)

  • At least 60% battery charge

  • A backup of your important data (flashing will erase everything)


👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱

Please wait 10s
Download
The download button will be available in 10 seconds.


How to Flash Infinix Smart 10 Plus (X6725B) Stock Firmware

⚠️ Disclaimer:

Flashing your phone improperly can lead to permanent damage. Follow the steps carefully. All personal data will be erased. Proceed at your own risk.

🔧 Step-by-Step Flashing Guide

Step 1: Extract the Firmware

  • Download and unzip the X6725B firmware package

  • Locate the MTxxxx_Android_scatter.txt file inside the extracted folder

Step 2: Install Drivers

  • Install the MediaTek USB VCOM Drivers on your computer

  • Restart your PC after installation for best results

Step 3: Launch SP Flash Tool

  • Open SP Flash Tool as administrator

  • Click on “Scatter-loading” and select the scatter file

Step 4: Prepare for Flashing

  • Select “Download Only” mode

  • (Optional) Uncheck Preloader.bin to avoid bricking risk (for advanced users)

Step 5: Connect Your Device

  • Power off the phone completely

  • Click Download in SP Flash Tool

  • Connect your phone to the PC via USB (press Volume Down or Up if needed)

  • Flashing should begin automatically

Step 6: Finish Flashing

  • Wait for the process to complete (you’ll see a green checkmark)

  • Disconnect your phone and power it on

  • The first boot may take 5–10 minutes

After Flashing

After successful flashing:

  • Set up the phone (language, Wi-Fi, Google account, etc.)

  • Check all functions: SIM, Wi-Fi, camera, audio, touchscreen

  • Dial *#06# to check if IMEI is intact

  • If needed, update the firmware via Settings > System Updates

Common Flashing Errors & Solutions

Issue Possible Solution
Phone not detected Reinstall VCOM drivers, change USB cable or port
SP Flash Tool error Try different version of SP Flash Tool
Flashing stuck or fails Uncheck Preloader or re-download firmware
Bootloop after flash Perform a factory reset via recovery
IMEI invalid/null Restore using MTK Meta Tool or SN Writer (advanced)

Pro Tips

  • ✅ Always double-check that your device model is X6725B

  • ⚠ Do not disconnect the phone while flashing is in progress

  • ❌ Avoid “Format All + Download” unless absolutely necessary

  • 🔒 For locked phones (FRP), some firmware versions may bypass the lock


Tags:

إرسال تعليق

Post a Comment (0)

أحدث أقدم
'; (function() { var dsq = document.createElement('script'); dsq.type = 'text/javascript'; dsq.async = true; dsq.src = '//' + disqus_shortname + '.disqus.com/embed.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(dsq); })();