Introduction
The Infinix Hot 60i (Model: X6728B) is a budget-friendly smartphone designed to deliver a smooth experience with its MediaTek processor, HD+ display, and long-lasting battery. Running on Android 12 with Infinix’s XOS skin, the Hot 60i is popular among users seeking reliable performance at an affordable price.
However, like any Android device, the Infinix Hot 60i can sometimes suffer from software issues such as boot loops, freezing, slow performance, or failures caused by improper updates or rooting attempts. In such cases, flashing the official stock firmware (flash file) is often the most effective solution to restore the device to its original factory condition.
This article provides all the information you need about the Infinix Hot 60i X6728B stock firmware, including when and how to flash it safely using SP Flash Tool.
What is Stock Firmware?
Stock firmware is the official operating system software provided by Infinix for your device. It contains the Android OS, system applications, drivers, and Infinix’s custom XOS interface.
Flashing stock firmware replaces corrupted or damaged software with a clean, factory version, fixing software glitches and restoring system stability.
Why Flash Infinix Hot 60i Firmware?
You may need to flash the stock firmware if your device:
-
🔄 Is stuck in a boot loop or freezes at the Infinix logo
-
🧱 Is soft-bricked or won’t boot after a failed update or root attempt
-
🔒 Has forgotten screen lock password, pattern, or PIN
-
⚠️ Experiences frequent app crashes, lag, or UI issues
-
📶 Shows network problems or invalid IMEI
-
🔄 Needs manual Android OS upgrade or downgrade
-
🔓 Requires FRP (Factory Reset Protection) bypass (advanced users)
Infinix Hot 60i (X6728B) Firmware Details
| Feature | Details |
|---|---|
| Device Name | Infinix Hot 60i |
| Model Number | X6728B |
| Android Version | Android 12 |
| XOS Version | XOS 12 |
| Chipset (SoC) | MediaTek Helio G37 |
| Firmware Type | Official Stock ROM |
| Firmware Format | Scatter File (.txt) |
| Flash Tool Required | SP Flash Tool |
| File Size | Approximately 2.5 GB |
| Status | Official and stable |
⚠️ Make sure to confirm your exact device model (X6728B) before flashing to avoid bricking your device.
Pre-Flash Requirements
Before you start flashing, prepare the following:
-
A Windows PC or Laptop
-
The correct Infinix Hot 60i X6728B stock firmware package
-
SP Flash Tool installed on your PC
-
MediaTek USB VCOM drivers installed
-
A compatible USB cable (preferably original)
-
At least 60% battery charge on your device
-
Backup of your important data (flashing will erase all data)
👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱
How to Flash Infinix Hot 60i (X6728B) Stock Firmware
⚠️ Disclaimer:
Flashing firmware carries risks. Incorrect flashing can brick your device permanently. Follow instructions carefully and proceed at your own risk.
Step-by-Step Flashing Guide
Step 1: Extract Firmware
-
Download and extract the Infinix Hot 60i X6728B stock firmware package
-
Locate the scatter file (usually named
MTxxxx_Android_scatter.txt)
Step 2: Install Drivers
-
Install MediaTek USB VCOM drivers on your PC
-
Restart the PC after installation
Step 3: Launch SP Flash Tool
-
Run SP Flash Tool as administrator
-
Click on “Scatter-loading” and select the scatter file from the firmware folder
Step 4: Configure Flashing
-
Select “Download Only” mode
-
Optionally, uncheck “Preloader” to reduce risk (recommended for beginners)
Step 5: Connect Your Device
-
Power off your Infinix Hot 60i completely
-
Click the Download button in SP Flash Tool
-
Connect the device to your PC using USB cable (hold volume buttons if required)
-
Flashing process should begin automatically
Step 6: Finish Flashing
-
Wait until you see the green checkmark or “Download OK” message
-
Disconnect the phone and power it on
-
The first boot may take several minutes
After Flashing
-
Set up your phone (language, Wi-Fi, Google account)
-
Verify basic functions such as calling, camera, Wi-Fi, and touchscreen
-
Check IMEI by dialing
*#06#to ensure it is intact -
Update system apps if needed
Common Flashing Errors & Solutions
| Issue | Solution |
|---|---|
| Phone not detected | Reinstall USB drivers, try different USB port or cable |
| Flashing fails or stuck | Try another version of SP Flash Tool, uncheck Preloader |
| Bootloop after flashing | Perform a factory reset from recovery mode |
| IMEI lost or invalid | Use MTK Meta Tool or SN Writer to restore (advanced) |
Final Tips
-
Always verify your device model before flashing firmware
-
Use genuine USB cables and avoid disconnecting during flashing
-
Backup your data beforehand as flashing erases everything
-
Avoid using “Format All + Download” unless absolutely necessary
إرسال تعليق