Introduction
The Infinix Smart 10 (Model: X6725D) is an entry-level smartphone designed for everyday tasks, running on Android with a lightweight, optimized user interface. While it's a reliable device, users may experience software issues over time, such as boot loops, crashing apps, forgotten passwords, or stuck-on-logo problems.
In such cases, flashing the official stock firmware (flash file) can help restore the phone to its factory condition. This article explains what the stock ROM is, when you need it, and how to flash it safely on your Infinix Smart 10 X6725D.
What Is Stock Firmware?
Stock firmware (also called stock ROM or flash file) is the official operating system and software package that comes pre-installed on your device by the manufacturer. It contains the Android OS, system apps, and all necessary drivers for your phone’s hardware.
Flashing the stock firmware reinstalls this software, solving a range of issues.
Why You Might Need to Flash Stock Firmware
Flashing stock ROM is useful in scenarios like:
-
Boot Loop – Phone stuck on the Infinix logo or restarting repeatedly
-
FRP Lock – Google verification triggered after factory reset
-
System Crash – Apps keep closing, or UI becomes unresponsive
-
Forgotten PIN/Password – You can’t access the phone
-
IMEI or Baseband Errors – Device shows "No service" or missing IMEI
-
Unbricking – After a failed root or custom ROM installation
-
Downgrade/Upgrade – Manually update or roll back Android version
Firmware Details
| Item | Details |
|---|---|
| Device Name | Infinix Smart 10 |
| Model Number | X6725D |
| Firmware Type | Official Stock ROM |
| Build Number | Varies by region (e.g., X6725D-H611A-R-OP-xxxx) |
| Android Version | Android 11 (Go Edition) or Android 12 (Go) |
| Chipset | MediaTek (Helio A22 or A25, depending on variant) |
| Firmware Format | Scatter File (.txt) |
| Flash Tool | SP Flash Tool |
| File Size | ~2.0 to 2.5 GB |
| Release Status | Official, Stable |
⚠️ Ensure that your device's model is X6725D before flashing. Flashing the wrong firmware can permanently brick your phone.
Requirements Before Flashing
-
Windows PC or Laptop
-
SP Flash Tool (Smart Phone Flash Tool)
-
MediaTek USB VCOM Drivers
-
Firmware Package for X6725D
-
Original USB Cable
-
Battery charged to at least 60%
-
Data Backup (if possible) — flashing will erase all data
👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱
Step-by-Step Flashing Guide Infinix Smart 10 (X6725D)
Step 1: Extract Firmware Package
-
Download and extract the X6725D stock ROM ZIP file
-
Inside, you'll find the scatter file, image files, and other required components
Step 2: Install Drivers
-
Install MediaTek USB VCOM Drivers on your PC to ensure device detection
Step 3: Open SP Flash Tool
-
Launch SP Flash Tool
-
Click on “Choose” next to Scatter-loading File and select the scatter
.txtfile from the firmware folder
Step 4: Begin Flashing
-
Select Download Only mode (avoid Format All unless necessary)
-
Click Download
-
Turn off your phone
-
Connect the device to PC using USB cable (hold Volume Down if needed)
-
Wait for the tool to detect the phone and begin flashing
Step 5: Flash Completed
-
Once the flashing process completes, you’ll see a green tick / "Download OK" message
-
Disconnect the phone and power it on — first boot may take several minutes
After Flashing
-
Complete Android setup steps
-
Restore your data from backup
-
Check SIM, Wi-Fi, Bluetooth, and camera functionality
-
Dial
*#06#to check IMEI (if missing, you may need to restore manually)
Common Issues & Fixes
| Problem | Solution |
|---|---|
| Device not detected | Reinstall USB drivers, try different USB cable/port |
| Flash tool shows errors | Make sure you selected the correct scatter file |
| Phone stuck on boot after flash | Perform a factory reset via recovery mode |
| IMEI invalid or null | Use advanced tools to restore IMEI (if backed up) |
Flashing Safety Tips
-
Never interrupt the flashing process (e.g., don't unplug the cable)
-
Avoid using firmware from an unknown model or version
-
Always check that your PC is stable (no battery shutdowns)
-
Use “Download Only” mode unless you are restoring full partitions
-
Keep a backup of your original firmware/NVRAM if possible
إرسال تعليق