Introduction
The Infinix Hot 60 Pro (Model: X6885) is a stylish mid-range smartphone powered by a MediaTek processor and running Android with XOS. It’s designed for users who want solid everyday performance with a modern design and smooth user interface.
Despite its reliability, the Hot 60 Pro can still encounter problems such as system crashes, stuck on boot logo, failed software updates, or issues caused by rooting or malware. In such cases, flashing the official stock firmware (also known as the flash file or ROM) can fix most software issues and bring your device back to life.
This article provides a full guide on the Infinix Hot 60 Pro X6885 firmware, including its benefits, device details, pre-flash requirements, and flashing steps.
What Is Stock Firmware?
Stock firmware (or stock ROM) is the official operating system software released by Infinix for a specific device model. It contains:
-
The base Android OS
-
XOS user interface and custom features
-
Pre-installed apps and system files
-
Partition data for boot, recovery, system, etc.
Flashing stock firmware can resolve software corruption, remove security locks, restore the device to factory settings, and fix bricked phones.
Why Flash the Infinix Hot 60 Pro (X6885) Firmware?
You may need to flash the stock ROM if you experience any of the following:
🔁 Device stuck on boot screen (bootloop)
🧱 Soft-bricked phone after failed root/custom ROM
🔒 Forgot screen lock (PIN, password, or pattern)
⚠️ Unresponsive or crashing apps/system errors
🆙 Manual upgrade or downgrade of Android firmware
🔄 FRP lock (Google account lock) after reset
📶 IMEI, baseband, or no network issues
Infinix Hot 60 Pro (X6885) Firmware Information
| Property | Details |
|---|---|
| Device Name | Infinix Hot 60 Pro |
| Model Number | X6885 |
| Android Version | Android 13 (Go Edition or Full) |
| XOS Version | XOS 13 |
| Processor (SoC) | MediaTek Helio G37 / G88 (varies) |
| Firmware Type | Official Stock ROM |
| Firmware Format | Scatter File (.txt) |
| Flash Tool Needed | SP Flash Tool |
| File Size | ~2.5 – 3.5 GB |
⚠️ Note: Always ensure the firmware matches your exact model (X6885) to avoid permanent damage or boot failure.
Before You Begin – Requirements
To successfully flash the Infinix Hot 60 Pro firmware, you’ll need:
-
A Windows PC or laptop
-
The correct Infinix X6885 firmware (unzipped)
-
SP Flash Tool (Smart Phone Flash Tool)
-
MediaTek USB VCOM drivers installed
-
A reliable USB data cable
-
At least 60% battery charge
-
Backup of all important data (flashing will erase the phone)
👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱
How to Flash Infinix Hot 60 Pro (X6885) Stock Firmware
⚠️ Disclaimer:
Flashing your device incorrectly may cause serious problems or brick the phone. Follow the instructions carefully and proceed at your own risk.
🔧 Flashing Instructions
Step 1: Download & Extract Firmware
-
Extract the downloaded firmware on your PC
-
Find the scatter file:
MTxxxx_Android_scatter.txt(e.g.,MT6765for Helio G37)
Step 2: Install MediaTek USB Drivers
-
Install the MediaTek USB VCOM Drivers
-
Restart your PC after driver installation
Step 3: Open SP Flash Tool
-
Run SP Flash Tool as administrator
-
Click “Scatter-loading” and browse for the
.txtscatter file
Step 4: Configure Flash Options
-
Let SP Flash Tool load the firmware components
-
Set download mode to “Download Only”
-
(Optional) Uncheck preloader to avoid hard brick if you're unsure
Step 5: Connect Your Phone
-
Power off the Infinix Hot 60 Pro
-
Click Download in SP Flash Tool
-
Connect the phone via USB cable (hold Volume Down or Volume Up if needed)
Step 6: Flashing Process
-
Wait for the progress bar to complete
-
A green checkmark ("Download OK") will confirm success
Step 7: Reboot the Device
-
Disconnect the phone and power it on
-
First boot may take 5–10 minutes
After Flashing
Once flashing is complete:
-
Go through the initial setup (language, Wi-Fi, Google account)
-
Check for missing features (camera, calls, internet)
-
Verify IMEI by dialing *#06#
-
Update apps and software if needed
Common Flashing Issues & Solutions
| Problem | Solution |
|---|---|
| Phone not detected | Reinstall drivers, try another USB port or cable |
| Flash stuck at 0% | Restart SP Flash Tool, reselect the scatter file |
| Authentication errors | Use correct DA/auth file or a different SP Flash Tool |
| IMEI null or invalid | Restore with SN Writer Tool or Maui META Tool |
| Bootloop after flashing | Perform a factory reset via recovery mode |
Tips & Precautions
✅ Make sure your phone is Infinix X6885
🔌 Use a high-quality or original USB cable
🧠 Use Download Only mode unless you’re formatting intentionally
🔐 Some firmware versions may unlock FRP automatically
🆘 Back up your IMEI/NVRAM before flashing (if possible)
Final Thoughts
Flashing the Infinix Hot 60 Pro (X6885) stock firmware is one of the most reliable ways to fix software issues, remove locks, or bring your phone back from a soft brick. Always ensure you're using the correct ROM and follow each step properly to avoid complications.
Whether you're troubleshooting issues or updating manually, stock firmware flashing is a powerful solution — just handle with care.
إرسال تعليق