Introduction
The Infinix Xpad 20 Pro (Model: X1201) is a premium Android tablet in the Xpad lineup, offering an immersive large-screen experience, smooth performance, and robust connectivity. However, like all Android devices, the Xpad 20 Pro may face issues such as software crashes, boot loops, or forgotten screen locks.
Flashing the official stock firmware (flash file) can restore your device to its factory state and fix a wide range of software problems. This guide explains the purpose, benefits, and flashing process of the Infinix Xpad 20 Pro (X1201) Stock ROM.
What Is Stock Firmware?
Stock firmware, also known as stock ROM, is the original Android operating system provided by the manufacturer. It's the same OS that comes pre-installed on the device out of the box.
If your device becomes unstable, gets stuck in a boot loop, or fails to turn on, flashing the official firmware can often solve the issue by reinstalling the operating system from scratch.
Why Flash Stock Firmware?
Here are common reasons to flash the Infinix Xpad 20 Pro (X1201) firmware:
-
Fix boot loop or stuck-on-logo issues
-
Recover from system crashes or failed OTA updates
-
Remove screen locks or forgotten PIN/password (in some cases)
-
Unbrick the device after a wrong flash or root failure
-
Restore device to factory condition for resale
-
Fix IMEI or baseband-related issues (if corrupted)
-
Downgrade or upgrade Android version (if supported)
Firmware Details
| Item | Details |
|---|---|
| Device Name | Infinix Xpad 20 Pro |
| Model Number | X1201 |
| Firmware Type | Official Stock Firmware (Flash File) |
| Android Version | Android 13 / Android 14 (based on variant) |
| Chipset | MediaTek (likely Helio G-series) |
| Firmware Format | Scatter File (.txt) |
| Flash Tool | SP Flash Tool |
| File Size | Approx. 3.0 GB |
| Status | Official, Stable Release |
⚠ Always verify your device model (X1201) and build number before flashing.
Prerequisites Before Flashing
Before flashing the firmware, ensure the following:
-
Your tablet is charged to at least 60%
-
You have access to a Windows PC or laptop
-
A working USB cable (original is best)
-
All important data is backed up — flashing wipes everything
-
You have the required drivers and tools installed
Tools You’ll Need
To flash the firmware, gather the following:
-
Infinix Xpad 20 Pro (X1201) Firmware Package
-
MediaTek USB VCOM Drivers
-
SP Flash Tool (Smart Phone Flash Tool)
-
USB Cable
-
Windows PC
👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱
Step-by-Step Flashing Instructions
Step 1: Extract the Firmware
Download and extract the firmware ZIP file on your PC. Inside, you'll find:
-
scatter.txtfile -
.imgor.binpartition files -
SP Flash Tool (optional)
-
USB drivers (optional)
-
Readme/Instructions
Step 2: Install USB Drivers
Install MediaTek USB VCOM drivers to ensure your PC can detect the tablet in flashing mode.
Step 3: Open SP Flash Tool
-
Launch flash_tool.exe from the SP Flash Tool folder
-
Click "Choose" next to Scatter-loading File, and select the
MTxxxx_Android_scatter.txtfile from the firmware folder
Step 4: Load Firmware and Start Flashing
-
Choose Download Only mode
-
Click Download
-
Turn off the tablet
-
Connect it to your PC via USB while holding Volume Down or Up (depending on model)
-
Flashing should start automatically
Step 5: Wait for Success Message
-
After a few minutes, you’ll see a green tick or "Download OK" message
-
Disconnect the tablet and power it on
After Flashing
-
The first boot may take 2–5 minutes
-
Set up the tablet as new
-
Check device settings, storage, and functionality
-
Dial
*#06#to verify IMEI restoration (if needed)
Common Flashing Errors & Fixes
| Problem | Solution |
|---|---|
| Device not detected | Reinstall USB drivers, try different USB port/cable |
| Flashing stuck or failed | Uncheck Preloader, or try a different tool version |
| Stuck on logo after flash | Perform a factory reset in recovery mode |
| IMEI missing | Use backup tool before flash or repair tools (advanced) |
Warnings & Disclaimer
-
Flashing firmware will erase all data on the device
-
Flashing the wrong firmware can brick your device
-
Use this guide at your own risk
-
Always verify your exact model and firmware version before flashing
Post a Comment