If your Infinix XPad 20 Pro X1201 is stuck on the logo, facing boot loop issues, or you simply want to restore it to factory condition, flashing the stock firmware is the ultimate fix. In this article, I’ll walk you through everything you need—from downloading the correct ROM to flashing it safely using SP Flash Tool.
๐ Why Flash the Infinix XPad 20 Pro?
Flashing the official firmware can solve:
- Boot loop or stuck-on-logo issues
- FRP (Factory Reset Protection) lock
- Lagging or crashing system
- Virus or malware infection
- Dead recovery or soft-bricked device
- Unwanted root or custom ROMs
It’s like giving your tablet a fresh start!
๐ฆ Firmware Details
| Specification | Info |
|---|---|
| Device Name | Infinix XPad 20 Pro |
| Model | X1201 |
| OS Version | Android 14 (XOS 14) |
| Chipset | MediaTek Helio G99 |
| File Format | Scatter file (.txt) |
| Flash Tools | SP Flash Tool, Miracle Box, CM2, Hydra, UMT |
Note: Always use firmware specific to model X1201. Flashing the wrong file can brick your device.
๐งฐ Required Files & Tools
Before flashing, make sure you have:
- ✅ Official firmware (ROM) for X1201
- ✅ SP Flash Tool v6 or higher
- ✅ MediaTek USB VCOM drivers
- ✅ Windows PC (recommended)
- ✅ USB cable
- ✅ 7-Zip or WinRAR to extract files
๐ง How to Flash Infinix XPad 20 Pro X1201
Step 1: Download & Extract Firmware
๐ ๐๐น๐ถ๐ฐ๐ธ ๐๐ฒ๐ฟ๐ฒ ๐ง๐ผ ๐๐ผ๐๐ป๐น๐ผ๐ฎ๐ฑ
Step 2: Install USB Drivers
- Install MediaTek VCOM drivers on your PC
- Restart your system after installation
Step 3: Launch SP Flash Tool
- Open
flash_tool.exe - Load the scatter file from the firmware folder
Step 4: Configure Flash Settings
- Select “Download Only” mode
- Load DA and AUTH files if required
Step 5: Connect Your Tablet
- Power off the device
- Connect via USB while holding Volume Down or Up
- SP Flash Tool will detect and start flashing
Step 6: Wait for Completion
- Do not disconnect until you see the green checkmark
- Reboot the tablet and complete setup
๐งช Common Errors & Fixes
| Error | Solution |
|---|---|
| BROM ERROR: S_FT_ENABLE_DRAM_FAIL | Use correct DA file and scatter |
| Device not detected | Reinstall drivers or change USB port |
| Stuck on logo | Perform factory reset from recovery mode |
✅ Conclusion
Flashing the Infinix XPad 20 Pro X1201 is a safe and effective way to fix software issues and restore performance. Whether you're a technician or a blogger helping others, this guide gives you everything you need to succeed.
Need help designing a downloadable PDF or infographic for your blog? Let me know—I’ll help you create one!
Post a Comment