Introduction
The Infinix Hot 60 Pro Plus (Model: X6886) is a recent addition to the Infinix Hot series, offering powerful mid-range features like a high-refresh-rate display, large battery, and MediaTek processor. With Android 13 or later and the latest XOS skin, it’s built for both performance and daily usability.
Still, like any Android device, it can suffer from software issues such as boot loops, failed updates, system crashes, or even soft bricking. In such cases, flashing the official Infinix stock firmware is the most reliable way to bring your device back to working condition.
This guide covers everything you need to know about the Infinix Hot 60 Pro Plus X6886 firmware, including its benefits, firmware details, flashing steps, and precautions.
What Is Stock Firmware?
Stock firmware (also called a stock ROM or flash file) is the original operating system and software package provided by the manufacturer. It includes:
-
The base Android OS
-
XOS user interface and features
-
System partitions (boot, system, recovery, etc.)
-
Pre-installed drivers and Infinix apps
Flashing this firmware will reset the phone to factory condition, remove bugs or corruption, and restore performance.
Why Flash the Infinix Hot 60 Pro Plus Firmware?
You may need to flash the X6886 stock ROM in situations like:
🔁 Boot loop or stuck on Infinix logo
🧱 Soft-bricked device after rooting or custom ROM
🔒 Forgot PIN, password, or screen lock
⚠️ Frequent app crashes or system lag
🆙 Manual upgrade/downgrade of the Android version
🔄 FRP lock after factory reset (some firmware removes it)
📶 IMEI or network issues (no signal, no baseband)
Infinix Hot 60 Pro Plus (X6886) Firmware Information
| Property | Details |
|---|---|
| Device Name | Infinix Hot 60 Pro Plus |
| Model Number | X6886 |
| Android Version | Android 13 / 14 (varies by region) |
| XOS Version | XOS 13 / XOS 14 |
| Processor (SoC) | MediaTek Helio G88 (MT6769V/CZ) |
| Firmware Type | Official Stock ROM |
| Firmware Format | Scatter File (.txt) |
| Flash Tool Needed | SP Flash Tool |
| File Size | ~3.5 – 4.5 GB |
⚠️ Note: Always confirm your device’s model number is X6886 before flashing. Installing incompatible firmware can brick your device.
Before You Begin – Requirements
Prepare the following before flashing:
-
A Windows PC or laptop
-
Infinix X6886 stock firmware package (unzipped)
-
SP Flash Tool (Smart Phone Flash Tool)
-
MediaTek USB VCOM Drivers installed on PC
-
Original USB cable or high-quality equivalent
-
At least 60% battery charge
-
Backup of all important data (flashing will wipe everything)
👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱
How to Flash Infinix Hot 60 Pro Plus (X6886) Stock Firmware
⚠️ Disclaimer:
Flashing your device involves risk. Make sure you follow all instructions carefully. Proceed only if you understand the process.
🔧 Flashing Instructions
Step 1: Extract Firmware
-
Extract the Infinix X6886 firmware ZIP file on your PC
-
Locate the scatter file:
MT6769_Android_scatter.txt
Step 2: Install Drivers
-
Install MediaTek USB VCOM Drivers
-
Restart your computer after installation
Step 3: Launch SP Flash Tool
-
Open SP Flash Tool as Administrator
-
Click “Scatter-loading” and select the firmware scatter file
Step 4: Load Firmware
-
SP Flash Tool will load the necessary partitions
-
Select “Download Only” mode
-
(Optional) Uncheck Preloader to reduce risk of hard brick
Step 5: Connect Device
-
Power off the phone completely
-
Click Download in SP Flash Tool
-
Connect the phone via USB (press and hold Volume Down or Up if needed)
Step 6: Wait for Completion
-
Flashing will start and take a few minutes
-
When finished, you’ll see a green checkmark (“Download OK”)
Step 7: Reboot Phone
-
Disconnect your phone and power it on
-
The first boot may take up to 10 minutes — this is normal
After Flashing
After successful flashing:
-
Complete the initial setup (language, Wi-Fi, Google account, etc.)
-
Test essential functions: calls, SMS, camera, internet, Bluetooth
-
Dial *#06# to check that IMEI is present and valid
-
Update system apps or software via OTA if available
Common Flashing Errors & Fixes
| Problem | Cause or Fix |
|---|---|
| Device not detected | Reinstall MediaTek drivers; use different USB port |
| Flashing stuck at 0% | Restart SP Flash Tool; reload scatter file |
| DA/Authentication error | Use correct DA/auth files (if required) |
| Invalid IMEI after flash | Restore using SN Writer or Maui META Tool |
| Bootloop after flashing | Boot into recovery and perform factory reset |
Tips & Precautions
✅ Confirm the model number is X6886 before flashing
🔌 Use a reliable USB cable and port
🧠 Use Download Only mode unless full formatting is necessary
🔐 Some firmware versions may remove FRP after flashing
🆘 Back up NVRAM or IMEI (if possible) before proceeding
Final Thoughts
Flashing the Infinix Hot 60 Pro Plus (X6886) stock firmware is a proven way to recover your phone from software damage, remove system errors, and restore original performance. By using the correct firmware and carefully following each step, you can safely unbrick or repair your phone in just a few minutes.
If you work with Infinix or other MediaTek-powered devices regularly, keeping your tools and firmware organized can help speed up future repairs or updates.
Post a Comment