Infinix GT 30 5G (X6876) Stock Firmware ROM (Flash File) DOWNLOAD and GUIDE

Introduction

The Infinix GT 30 5G (Model: X6876) is a performance-driven smartphone designed for gamers and power users. Featuring a high refresh rate AMOLED display, 5G connectivity, and a MediaTek Dimensity processor, it's a standout in Infinix's lineup.

Despite its solid specs, software-related issues such as boot loops, system crashes, forgotten passwords, or failed updates can arise. In such cases, flashing the official stock firmware (flash file) is often the best solution to restore the device to factory condition.

This article guides you through everything you need to know about the Infinix GT 30 5G stock ROM, including when to use it, firmware details, and how to flash it safely.

What Is Stock Firmware?

Stock firmware, also known as stock ROM or flash file, is the original operating system pre-installed by the manufacturer. It includes the Android OS, system UI, and all device-specific drivers and configurations.

Flashing the stock ROM reinstalls the OS, helping to resolve persistent software issues and return the device to a working state.

When to Flash the Stock ROM?

You should consider flashing the Infinix GT 30 5G stock firmware if:

The device is stuck on the boot logo or bootloop
You're facing frequent system crashes or instability
You've forgotten the device password/PIN (with data loss)
You need to remove FRP lock (in supported cases)
You want to unbrick the device after failed root or custom ROM
You're experiencing no signal, invalid IMEI, or baseband issues
You want to manually update or downgrade the Android version

Infinix GT 30 5G (X6876) Firmware Information

Firmware Property	Details
Device Name	Infinix GT 30 5G
Model Number	X6876
Firmware Type	Official Stock ROM
Android Version	Android 14 (XOS 14 or newer)
Chipset	MediaTek Dimensity 7020 / 6100+ (varies by market)
Firmware Format	Scatter File (.txt)
Flash Tool	SP Flash Tool (Smart Phone Flash Tool)
File Size	~3.5 GB (approximate)
Status	Official & Stable

⚠️ Always confirm your phone’s exact model number (X6876) and build version before flashing.

Flashing Requirements

Before flashing your Infinix GT 30 5G, make sure you have:

A Windows PC or laptop
SP Flash Tool installed
MediaTek USB VCOM Drivers
The official firmware package for Infinix X6876
A good-quality USB cable
At least 60% battery charge
A full backup of your data (flashing will wipe the device)

👇 𝗖𝗹𝗶𝗰𝗸 𝗛𝗲𝗿𝗲 𝗧𝗼 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱

Please wait 10s

Download

The download button will be available in 10 seconds.

How to Flash Infinix GT 30 5G (X6876) Stock ROM

⚠ Disclaimer:

Flashing your device incorrectly can result in permanent damage. Follow the instructions carefully, and proceed at your own risk.

🔧 Step-by-Step Flash Guide:

Step 1: Extract the Firmware

Download and extract the Infinix GT 30 5G X6876 firmware ZIP to a folder.
Locate the scatter file (e.g., MT68xx_Android_scatter.txt).

Step 2: Install USB Drivers

Install MediaTek USB VCOM drivers on your PC.
Restart your computer if required.

Step 3: Launch SP Flash Tool

Open SP Flash Tool.
Under Scatter-loading File, load the .txt scatter file from the firmware folder.

Step 4: Configure Options

Choose Download Only mode (recommended for most users).
Uncheck Preloader only if you’re unsure or want to avoid hard brick risk.

Step 5: Connect the Device

Power off the phone.
Click Download in SP Flash Tool.
Connect the device via USB cable (hold Volume Down or Volume Up if needed).
The tool will detect the phone and start flashing automatically.

Step 6: Flash Complete

Wait for the process to finish.
A green checkmark or “Download OK” message indicates success.
Disconnect the phone and power it on.

After Flashing

The first boot may take 5–10 minutes—be patient.
Go through initial setup (language, Wi-Fi, account login).
Verify features: camera, SIM, fingerprint, IMEI, etc.
If needed, perform a factory reset from recovery for smooth performance.

Troubleshooting & Tips

Issue	Possible Fix
Phone not detected	Reinstall drivers, change USB port, or use another cable
Flashing fails (red error)	Uncheck Preloader, check scatter file, retry with a different SP Flash Tool version
Stuck on boot screen	Boot into recovery mode and perform a factory reset
Invalid IMEI or no signal	Use advanced tools (e.g., Maui Meta) to restore IMEI (if legally allowed)

Safety Precautions

Do not disconnect the device while flashing
Always use the correct firmware version for your model (X6876)
Avoid using Format All + Download unless you know what you’re doing
Flashing will erase all user data, so backup beforehand