Redmi S2 / Y2 EDL Test Point SMZ Solution

bySMZ Solution - 0

🔧 Steps & Info (Redmi S2 / Y2 EDL Test Point):

  1. Power off the device completely (if possible, disconnect battery once).

  2. Remove the back cover & battery shield carefully.

  3. Locate the two EDL test points on the main board (near the battery connector).

  4. Short these two points with tweezers or a conductive tool.

  5. While shorting, connect the USB cable to your PC.

  6. The phone should now appear in Device Manager as "Qualcomm HS-USB QDLoader 9008".

  7. Once detected, use Mi Flash Tool or QFIL to flash stock firmware.

📍 Redmi S2 / Y2 Test Point Location:

  • The test points are usually next to the battery connector, small golden pads side by side.

  • On this model, they are just beside the SIM slot area under the shield.

⚠️ Caution:

  • This process requires opening the back panel → warranty will be void.

  • Wrong shorting can damage the board, so proceed carefully.

  • Always use the correct fastboot/EDL firmware for ysl.


Tags:

إرسال تعليق

Post a Comment (0)

أحدث أقدم
'; (function() { var dsq = document.createElement('script'); dsq.type = 'text/javascript'; dsq.async = true; dsq.src = '//' + disqus_shortname + '.disqus.com/embed.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(dsq); })();